REPLACEMENT:

1. Insert feed forked connection into upright arm through bottom of machine, so that it fits around eccentric, as shown in fig. 44.
2. Replace eccentric screw and nut, fig. 45, engaging feed forked connection to feed rock shaft.
3. Replace feed regulator.
4. Adjust position of feed dog.
5. Replace bottom cover and close top cover.

 

REMOVAL

1. Loosen top cover screw and turn cover aside.
2. Remove two cap screws, Fig. 44, and remove connecting rod cap.
3. Remove bottom cover.
4. Remove eccentric screw and nut, Fig. 45, disengaging connecting rod from feed lifting rock shaft
5. Remove connecting rod through bottom of machine.

REPLACEMENT:

1. Insert connecting rod into upright arm through bottom of machine, so that it fits around bottom half of pulley (or gear) hub on eccentric, Fig. 44.
2. Replace connecting rod cap and fasten with cap screws.
3. Replace eccentric screw and nut, Fig. 45, engaging connecting rod to feed lifting rock shaft.
4. Adjust feed dog height.
5. Replace bottom cover and close top cover.

FEED FORKED CONNECTION

REMOVAL:

1. Remove feed regulator.
2. Open top cover and remove bottom cover.
3. Remove eccentric screw and nut, Fig. 45, disengaging feed forked connection from feed rock shaft.
4. Remove feed forked connection through bottom of machine.

Singer Featherweight Service Manual



History, dating, manuals, parts lists etc

Featherweight History –– Machine Dating –– Condition Chart ––Accessories ––Parts lists/numbers –– Owners' Manuals –– Workshop Manuals –– Featherweights Facts and Myths –– Freearm Applications –– Advertising Art Work –– Chamber of Horrors –– Cleaning Your Machine –– Identify Your Manual–– Approved Links


`
For the best selection of the finest available Featherweights

Standard Machines –– 1951 Centennials –– White/Green Models –– Freearm 222s –– Singer Featherweight Toys ––Spare Parts Sales –– Accessory Sales – Our Guarantee –– Repairs/Servicing –– Motor rebuilds and voltage conversions –– What our customers say –– Lay-away plan

The manual is split into multiple parts. Pictures are the original but the type has been reset for clarity. This was intended for trained engineers – only take on jobs with which you are comfortable.

Part 21~
Index –– Part 2 –– Part 3 –– Part 4 –– Part 5 –– Part 6 –– Part 7 –– Part 8 –– Part 9 –– Part 10 –– Part 11 –– Part 12 –– Part 13 –– Part 14 –– Part 15 –– Part 16 –– Part 17 –– Part 18 –– Part 19 –– Part 20 –– Part 22 –– Part 23 –– Part 24 –– Part 25 –– Part 26 –– Part 27 –– Part 28

Index –– Part 2 –– Part 3 –– Part 4 –– Part 5 –– Part 6 –– Part 7 –– Part 8 –– Part 9 –– Part 10 –– Part 11 –– Part 12 –– Part 13 –– Part 14 –– Part 15 –– Part 16 –– Part 17 –– Part 18 –– Part 19 –– Part 20 –– Part 22 –– Part 23 –– Part 24 –– Part 25 –– Part 26 –– Part 27 –– Part 28

REMOVALS AND REPLACEMENTS
FEED LIFTING ROCK SHAFT CONNECTING ROD