REMOVAL:
1. Remove hand wheel.
2. Remove stitch indicator plate screws, Fig. 42, regulator hinge screw and spring washer.
3. Remove feed regulator and indicator plate as a unit.

REPLACEMENT:
1. Insert regulator into the machine. Make certain that the roller of feed forked connection rides in the slideway of regulator block.
2. Replace hinge screw and washer. The prongs of the washer should face inward.
3. Replace indicator plate screws.
4. Replace hand wheel.

REMOVAL:

Proceed as instructed for gear-driven machines except as follows:
1. Do not disturb wiring.
2. Loosen set screws in hook shaft pulley, Fig. 41, counterbalance and hook assembly. Remove old shaft out through left end of machine. Do not use new shaft as a tool.

REPLACEMENT:

Proceed as instructed for gear-driven machines except as follows:

1. Insert new shaft from the left.
2. Insert shaft through pulley and belt. Place pulley against right end bushing and tighten set screws.

FEED REGULATOR
Singer Featherweight Service Manual



History, dating, manuals, parts lists etc

Featherweight History –– Machine Dating –– Condition Chart ––Accessories ––Parts lists/numbers –– Owners' Manuals –– Workshop Manuals –– Featherweights Facts and Myths –– Freearm Applications –– Advertising Art Work –– Chamber of Horrors –– Cleaning Your Machine –– Identify Your Manual–– Approved Links


`
For the best selection of the finest available Featherweights

Standard Machines –– 1951 Centennials –– White/Green Models –– Freearm 222s –– Singer Featherweight Toys ––Spare Parts Sales –– Accessory Sales – Our Guarantee –– Repairs/Servicing –– Motor rebuilds and voltage conversions –– What our customers say ––Lay-away plan

The manual is split into multiple parts. Pictures are the original but the type has been reset for clarity. This was intended for trained engineers – only take on jobs with which you are comfortable.

Part 19
Index –– Part 2 –– Part 3 –– Part 4 –– Part 5 –– Part 6 –– Part 7 –– Part 8 –– Part 9 –– Part 10 –– Part 11 –– Part 12 –– Part 13 –– Part 14 –– Part 15 –– Part 16 –– Part 17 –– Part 18 –– P

art 20 –– Part 21 –– Part 22 –– Part 23 –– Part 24 –– Part 25 –– Part 26 –– Part 27 –– Part 28

Index –– Part 2 –– Part 3 –– Part 4 –– Part 5 –– Part 6 –– Part 7 –– Part 8 –– Part 9 –– Part 10 –– Part 11 –– Part 12 –– Part 13 –– Part 14 –– Part 15 –– Part 16 –– Part 17 –– Part 18 –– Part 20 –– Part 21 –– Part 22 –– Part 23 –– Part 24 –– Part 25 –– Part 26 –– Part 27 –– Part 28

REMOVALS AND REPLACEMENTS

ROTATING HOOK SHAFT (BELT DRIVEN MACHINES)